|
HI-MACS®
Acrylic Solid Surface
Care &
Maintenance
Care and Cleaning
HI-MACS solid surfaces are stain-resistant,
finished component products ideal for countertops, kitchen
tops, and other surfaces subject to hazards of moisture and
heavy wear. Even the most pristine areas won't succumb to
coffee, ink, or other stains. No special cleaning products are
needed to keep HI-MACS looking beautiful day in and day out.
While HI-MACS is extremely tough and durable, like any other
fine material it can be damaged if abused or mistreated.
Reviewing these care and cleaning instructions can assist you
in understanding how easy it is to care for your new HI-MACS
surface and how you can prevent more severe damage that may
require special repairs. With a little knowledge, you can
enjoy the elegance and beauty of HI-MACS for years to come.
Normal Cleaning
HI-MACS is non-porous so it can be wiped
clean with a damp cloth or sponge and mild detergents or
general purpose cleaners such as Mr. Clean. If you have
matte finish, abrasive cleaners like Ajax or Comet may
also be used, Periodically it may also be helpful to go over
the entire surface in a circular motion with an abrasive
cleaner or wet Scotch Brite pad to maintain a uniform
appearance.
Simple Precaution
Do not place hot pans directly from the
burner or oven on the HI-MACS surface. Even thought HI-MACS
can withstand sustained temperatures up to 225¡ÆF, prolonged
or extreme heat could cause yellowing. A trivet should always
be used under hearted appliances, such as crock pots, electric
frying pans, etc. Although minor cuts and scratches in HI-MACS
can be repaired, deep cuts will require the services of a
professional. Strong acids such as those found in drain
cleaners, toilet bowl and oven cleansers should be used
cautiously around HI-MACS. If these items are accidentally
spilled, wipe them up at once. Some of these items, when left
on the surface, may cause whitening, which can be difficult to
remove.
Spills and Stains
While most everyday spills can be removed
with the cleaning techniques listed, some troublesome spills
and stains such as food dye, tea and fruit drinks may require
more aggressive cleaning. These items can be removed with full
strength bleach followed by a general cleanser. then. Note:
Bleach should only come in contact with the surface for two to
five minutes. On a matte finish, if you prefer, you can scrub
with an abrasive cleaner. Even nail polish can be removed from
HI-MACS with nail polish remover or abrasive cleanser.
Cigarette
While HI-MACS will not burn, should a
lighted cigarette accidentally come in contact with the
surface it could leave a nicotine stain or scorch mark. Either
of these can be removed by cleaning with an abrasive cleanser
or buffing in a circular motion with a Scotch Brite pad.
Repairing Scratches
Solid Colors
For removing superficial scratches, rub in a circular motion a
wet#7448 Scotch Brite buffering pad until the scratches are
removed, Clean thoroughly with soap and water and let dry
Note: Deep scratches can be removed by first carefully sanding
lightly with 120 grit sandpaper followed by 220 and 320 grit
sandpaper. Then rub the surface with a wet#7448 Scotch Brite pad in a circular motion to restore the finish.
Granite Colors
For removing superficial scratches, rub in a circular motion a
wet#7448 Scotch Brite scouring pad until the scratches are
removed. Clean thoroughly with soap and water and let dry.
Note : Deep scratches can be removed by first carefully
sanding lightly with 120 grit sandpaper followed by 220 and
320 grit sandpaper. Then rub the surface with a wet#7448
Scotch Brite pad in a circular motion to restore finish.
For added protection, or if any additional luster is desired,
after the surface is dry apply a non- wax polish cleaner or
other recommended surface dressing and wipe with a clean, dry
cloth. Wipe dry using another cloth.
|
